공구형상 최적화 및 비자성체의 자가연마 특성 연구
기관명 | NDSL |
---|---|
저널명 | 한국공작기계학회지 = Journal of the Korean society of machine tool engineers |
ISSN | 1226-8097, |
ISBN |
저자(한글) | 김상오,유만희,곽재섭 |
---|---|
저자(영문) | |
소속기관 | |
소속기관(영문) | |
출판인 | |
간행물 번호 | |
발행연도 | 2010-01-01 |
초록 | The magnetic abrasive polishing (MAP) process is used to achieve the nano-meter grade polishing results on flat or complicated surface. In previous study, polishing the stainless steel plate which is a non-magneto-material was tried. To polish non-magneto-materials using the MAP process was very difficult because the process was fundamentally possible by the help of a magnetic force. Therefore, it had lower efficiency than magneto-materials such as SM45C. In this study, optimization for tool geometry of the MAP was performed to improve the magnetic force between tool and workpiece. Moreover, a permanent magnet was installed below the non-magneto-material to improve the magnetic force. And then the design of experiments was carried out to evaluate the effect of the MAP parameters on the polishing results. |
원문URL | http://click.ndsl.kr/servlet/OpenAPIDetailView?keyValue=03553784&target=NART&cn=JAKO201028542315877 |
첨부파일 |
과학기술표준분류 | |
---|---|
ICT 기술분류 | |
DDC 분류 | |
주제어 (키워드) | 자기연마,실험계획법,자속밀도,자기력,Magnetic abrasive polishing,Design of experimental method,Magnetic density flux,Magnetic force |